5/8" - 4 Double Lead Stub Acme

This 5/8 – 4 double lead stub acme machine screw is available in both alloy steel and stainless steel with a corresponding aluminum bronze nut. Both right hand and left hand threads are available.

MACHINE SCREW SPECIFICATIONSRH LH
ALLOY STEEL SCREW PART NO.SS 063 R 025 ASS 063 L 025 A
STAINLESS STEEL SCREW PART NO.SS 063 R 025 SSS 063 L 025 S
THREAD FORM STUB ACME
SCREW DIAMETER TURNS / INCH 5/8 - 4
PITCH / LEAD 0.125 IN./0.250 IN.
ROOT DIAMETER 0.515 IN.
SCREW WEIGHT (LB. / FT.) 0.85
TORQUE TO RAISE 1 POUND 0.079 IN.- LB.
MAXIMUM SCREW LENGTH 12 FEET

 

Nut and Flange Specifications


NUT SPECIFICATIONSRH LH
NUT PART NO.SN 063 R 025 BSN 063 L 025 B
NUT WITH FLANGE PART NO.SF 063 R 025SF 063 L 025
DYNAMIC LOAD CAPACITY (LBS.) 1,953
STATIC LOAD CAPACITY (LBS.) 6,250
EFFICIENCY 51.4%
MATERIAL Bronze
NOMINAL DIAMETER "A" 1.12 IN.
NUT LENGTH "B" 1.00 IN.
THREAD LENGTH "C" 0.50 IN.
THREAD SIZE 0.937-16 UN
FLANGE PART NO.FL-0937
FLANGE DIAMETER "D" 2.60 IN.
FLANGE THICKNESS "E" 0.53 IN.
FLANGE HOLE DIAMETER "F" 0.266 IN.
NUMBER OF HOLES IN FLANGE "G" 4
FLANGE BOLT CIRCLE "H" 2.090 IN.
FLANGE MATERIAL BLACK OXIDE COATED STEEL

Click on Product Specifications below to view Bearing Block and Screw End Conditions options available for this screw.

  • Stainless steel screw
  • Aluminum bronze nut
  • Steel flange with black oxide coating

Sample Part Number:

Click on the part number to reveal additional information about the screw design and shaft codes.

Thread Form


A: Acme
S: Stub Acme

Component

A: Assembly
S: Screw - without ball nut or bearing mounts

Screw Diameter - Thread direction - TPI (English)

Dia/TPI Code
1/2 – 8 050 R 013 (Stub Acme)
5/8 – 8 * 063 R 013 (Stub Acme)
5/8 – 4 * 063 R 025 (Stub Acme)
5/8 – 2 063 R 050 (Stub Acme)
3/4 – 5 * 075 R 013
7/8 – 2 * 088 R 050
1 –10 100 R 010
1 – 4 * 100 R 025
1 – 2 100 R 050
1 – 1 100 R 100 (Stub Acme)
1 1/4 – 4 125 R 025
1 1/2 – 4 150 R 025
1 1/2 – 2 2/3 150 R 038
1 1/2 – 2 2/3 * 150 R 038 (Stub Acme)
1 1/2 – 2 150 R 050
2 – 4 200 R 025
2 – 2 * 200 R 050
2 1/4 – 4 * 225 R 025
2 1/4 – 2 * 225 R 050
2 1/2 – 4 250 R 025
2 1/2 – 2 * 250 R 050
3 3/8 – 1 1/2 338 R 067 (Stub Acme)
3 1/2 – 1 1/2 350 R 067
3 3/4 – 1 1/2 375 R 067
4 1/2 – 1 1/2 450 R 067
5 – 1 1/2 500 R 067
6 – 1 1/3 600 R 075

R – Right-hand – all thread diameters/leads are available with right hand threads
L – Left-hand *- Substitute an ”L” in the part number for left hand leads
Stub Acme screws offer a larger root diameter than their Acme counterparts
*Available in stainless steel

 

Screw Material

A: Alloy Steel
S: Stainless Steel

Note: not all threads or materials are available for all sizes

First End of Screw

(Flange or threaded end of nut always faces second end)

Bearing Mount Options Machining Options (choose one that corresponds to the bearing block)
SB - Simple Single* 1N – Threaded shaft only
DB - Simple Double 2K –  Thd Shaft w Kwy, 2L – Thd Shaft no Kwy, 2N – Threaded shaft only
FB - Fixed Double 3K –  Thd Shaft w Kwy, 3L – Thd Shaft no Kwy, 3N – Threaded shaft only
XX - No Bearing 4K –  Shaft w Keyway, 4L – Shaft no Keyway, 4N – Support only, XX – No Machining

(When selecting ”XX – No Bearing”, choose from mounting options 1K through 4N  or XX, above)
* All Simple Single bearing mounts are designed for radial loads only

Second End of Screw

(Flange or threaded end of nut always faces away from second end)

Bearing Mount Options Machining Options (choose one that corresponds to the bearing block)
SB - Simple Single* 1N – Threaded shaft only
DB - Simple Double 2K –  Thd Shaft w Kwy, 2L – Thd Shaft no Kwy, 2N – Threaded shaft only
FB - Fixed Double 3K –  Thd Shaft w Kwy, 3L – Thd Shaft no Kwy, 3N – Threaded shaft only
XX - No Bearing 4K –  Shaft w Keyway, 4L – Shaft no Keyway, 4N – Support only, XX – No Machining

(When selecting ”XX – No Bearing”, choose from mounting options 1K through 4N  or XX, above)
* All Simple Single bearing mounts are designed for radial loads only

Nut Properties

B - Bronze
X - Do Not Include Nut in Assembly

Other Options

F - Include Flange
X - Do Not Include a Flange

Screw Length 000.00"

Enter value in inches with decimal if needed
Note that available screw length varies among screw sizes.

 

SB Bearing Blocks

Screw NumberBearing Mount No.ABCDEFGHIJK
SS063R013S SB-10 3.000 1.875 1.000 0.375 1.125 1.125 2.250 0.672 1.344 .281 (4x) .406 Thru
SS063R025S .625 C'Bore
SS063R050A .875 Deep

DB Bearing Blocks

Screw NumberBearing Mount No.ABCDEFGHIJKL
SS063R013S DB-10 3.000 1.875 1.000 0.375 1.125 1.125 2.250 0.672 1.344 .281 (4x) .406 Thru N/A
SS063R025S .625 C'Bore
SS063R050A .875 Deep

FB Bearing Blocks

Screw NumberBearing Mount No.ABCDEFGHIJKL
SS063R013S FB-10 3.000 1.875 1.000 1.125 3.450 0.375 2.250 1.500 0.938 1.875 .250 Thru .406 Thru
SS063R025S .375 C'Bore .625 C'Bore
SS063R050A #5 Taper Pin 1.130 Deep

SB Screw End Conditions

Screw NumberBearing Mount No.o S1A1A2A3A4A5A6o A7A8A9A10A11
SS063R013S SB-10 0.3940 0.650 0.330 0.44 0.127 0.354 0.800 1.00 .391-32 UNS W-00 N-00 6200
SS063R025S 0.3936 0.125
SS063R050A    

DB Screw End Conditions

Screw NumberBearing Mount No.oS1oS2A1A2A3A4A5A6A7A8A9
SS063R013S DB-10 0.3940 0.312 2.84 2.09 1.700 0.354 0.000 .391-32 UNS W-00 N-00 1/8 x 1/2
SS063R025S 0.3936 0.311
SS063R050A    

FB Screw End Conditions

Screw NumberBearing Mount No.oS1oS2A1A2A3A4A5A6A7A8A9A10A11
SS063R013S FB-10 0.3940 0.312 3.50 2.75 2.25 1.515 0.354 0.825 0.050 .391-32 UNS W-00 N-00 1/8 x 1/2
SS063R025S 0.3936 0.311
SS063R050A    

Files must be less than 2 MB.
Allowed file types: gif jpg png tif pdf dwg jpeg jax.
Files must be less than 2 MB.
Allowed file types: gif jpg png tif pdf dwg jpeg jax.

Request a quote for products and repair parts:

  • New Product Quote: Visit the product sections on this website and select or construct a part number and quantity of the product you wish to purchase.
  • Reorder a Product: Include the previous PO or serial number along with the quantity you need.
  • Repair Parts: View the product manual or exploded view to identify the components that are needed. Locate the product serial number and include it in your correspondence with Customer Service.

If you need us to repair your product, request a Returned Goods Authorization (RGA) number by email, phone, or simply fill out the form above and mention "RGA" in message box.

sales@joycedayton.com
937-297-7173 (fax)
937-294-6261 (telephone) 800-523-5204 (toll free, U.S. & Canada)

By submitting this form, I agree to the Joyce/Dayton Website Usage Terms and ConditionsPrivacy Policy, and that a Joyce/Dayton representative may contact me.

CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.