Shafting

Page Header

Shafting

Joyce shafting matches perfectly with Joyce jacks and couplings to meet a wide variety of system requirements

Shafting

Joyce shafting matches perfectly with Joyce jacks and couplings to meet a wide variety of system requirements. Shafting is made from cold-finished 1018 steel, the ends machined to ANSI-standard keyways.

Diameter Selection Chart:

To use this chart, follow these steps:

  • Find a “Shaft Torque” value in the far left column that is greater than, or equal to , you calculated torque value.
  • Move to the second column to find your “Normal Shaft Diameter” (round up to arrive at an offered shaft size).
  • The third column shows the maximum allowable shaft span before supports (pillow blocks) are required.
  • Compare your actual shaft speed (RPM) with the maximum allowable speed ( RPM) for the shaft you have chosen. If you are above the allowable shaft speed, then increase the shaft size until it falls into the allowable range.

Length Specifying Information:

Joyce shafts can be ordered in 1/16 inch increments of length. When specifying shaft length, please refer to the table under Product Specifications below.

Ordering Information:

Shafting is an important component in jack and actuator systems and it is important to select the best option based on torque and rotational speed requirements. Refer to the selection chart and example part numbers included here.

Product Media

jack
Dimensions and Minimum Shaft Length
Model S50 S63 S75 S88 S100 S113 S125 S138 S150 S163 S175 S188 S200 S213 S225 S238 S250 S262
Minimum 
Shaft Length* 
"L"
Flange 7 7 7 7 7 7 7 7 7 7 7 8 8 10 10 10 10 10
Sleeve 5 5 5 5 5 6 6 6 7 7 7 8 8 10 10 10 10 10
Shaft Diameter "D" Inches Nominal 1/2 5/8 3/4 7/8 1 1 1/8 1 1/4 1 3/8 1 1/2 1 5/8 1 3/4 1 7/8 2 2 1/8 2 1/4 2 3/8 2 1/2 2 5/8
Actual .500
.498
.625
.623
.750
.748
.875
.873
1.000
.998
1.125
1.123
1.250
1.248
1.375
1.373
1.500
1.498
1.625
1.623
1.750
1.748
1.875
1.872
2.000
1.997
2.125
2.122
2.250
2.247
2.375
2.372
2.500
2.497
2.625
2.621
Keyway Width "W" 1/8 3/16 3/16 3/16 1/4 1/4 1/4 5/16 3/8 3/8 3/8 1/2 1/2 1/2 5/8 5/8 5/8 5/8
Keyway Flat Length "FL" 1.25 1.25 1.25 1.25 1.25 1.5 1.5 1.75 1.75 1.75 2 2 2 2.5 2.5 2.5 2.5 2.5

*These are the minimum shaft lengths that can be ordered when Joyce Model "S" sleeve or "F" flange-type couplings are selected.

View Shafting Diameter Chart

 
Request A Quote
One file only.
512 MB limit.
Allowed types: gif, jpg, jpeg, png, bmp, eps, tif, pict, psd, txt, rtf, html, odf, pdf, doc, docx, ppt, pptx, xls, xlsx, xml, avi, mov, mp3, mp4, ogg, wav, bz2, dmg, gz, jar, rar, sit, svg, tar, zip.

Request a quote for products and repair parts:

  • New Product Quote: Visit the product sections on this website and select or construct a part number and quantity of the product you wish to purchase.
  • Reorder a Product: Include the previous PO or serial number along with the quantity you need.
  • Repair Parts: View the product manual or exploded view to identify the components that are needed. Locate the product serial number and include it in your correspondence with Customer Service.

If you need us to repair your product, request a Returned Goods Authorization (RGA) number by email, phone, or simply fill out the form above and mention "RGA" in message box.

CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.

By submitting this form, I agree to the Joyce/Dayton Website Usage Terms and ConditionsPrivacy Policy, and that a Joyce/Dayton representative may contact me.